We did production for a Conference a couple weeks ago called "Man Up". For this conference we used a wide variety of services we have to offer. . . Here's a run down of all the technology we used for this event:
Sound
Biggest system we own... There was a different band on both nights so it required completely different stage gear (mics, drums, monitors, etc) between the two nights. Here's a general overview:
- (4) JBL Tops
- (2) Dual 18" JBL Subs
- Wedges on the 1st Night
- In Ears on the 2nd Night
- Shure Wireless Handhelds
- AKG Lapels
- I could go on and on. . .
Lighting
We got lucky here and were able to patch in and use all of the "In House" lighting for Front/White lighting, which made it slightly easier on us but also made it look much better since the Centene Center has a lot to offer in this area. To make that happen we used a program called MyDMX and a Chauvet DMX Splitter. Here's what lighting we used of ours:
- 6 LED Pars on Floor
- 9 LED Pars on Truss
- 2 LED Wash Panels on Floor
- 2 LED Wash Panels on Truss
- 1 LED Strip
- MyDMX ran on an HP Laptop
Screens
- (2) 7.5' x 10' Rear Project Screens
- (2) 2000 Lumen Projectors on Rear Screens
- (1) 3200 Lumen Projector on Backdrop Screen
- Cat 5 to VGA Converters for Long Runs
We used a program called Easy Worship for Backgrounds/Lyrics on the Center Screen. Ran on a Sony Vaio.
Video
For this event we used 3 Camera Positions. We had live video on the outside screens and recorded that signal as well.
- Sony PD150 Camera
- Sony VX2000 Camera
- Sony CX7 Camera
- Sony XR11 Camera
- Videonix MX1 Switcher
- Recorded Video to Sony Vaio
- S-Video to VGA for IMAG Screens
The recorded audio came from 2 sources:
- Recording Output of the House Mixer
- Crowd Mic's recorded to an iMac using Logic
- Post Production for Video/Audio was done using Adobe Premier CS5 and Pro Tools 9
Truss
- 40' of 12" Box Truss
- (2) 18' Crank Stands
If you would like details or tutorials on any of the gear mentioned here feel free to contact me!